Nokia X6 Camera Failure Problem Solution - hardware repair solution

Nokia X6 Camera Failure Problem Solution - hardware repair solution - welcome to our blog Techno Live, now we will discuss information about the Nokia X6 Camera Failure Problem Solution - hardware repair solution, our admins on this blog has been around to collect information you are looking for so that we usakan to display complete information for you, and in this blog, you can also search for other information, ok please continue reading may be easily understood:

This is about : Nokia X6 Camera Failure Problem Solution - hardware repair solution
And this article : Nokia X6 Camera Failure Problem Solution - hardware repair solution
Article Nokia X6,

You can also see our article on:


Nokia X6 Camera Failure Problem Solution - hardware repair solution

Before using or applying this solution ensure to restore,flash and update,
the device firmware on Nokia X6. Oftentimes camera failure is cause by an interrupted firmware, restoring or flashing it back again will fix the problem. But
if that does not solved the problem you may then proceed to hardware repair troubleshooting, especially
if the device suffered from wet damaged and accidentaly dropped by the user.
The problem may possibly lies on faulty hardware components.



This solution below shows the main camera circuit on Nokia X6 and can be used as a guide to fix and repair camera hardware failure issues.


Nokia X6 Camera Hardware Problem Solution
nokia X6 camera repair solution
Camera Repair Tips:
a) Try to replace a new camera replacement module.
b) Check and clean the camera connector.
c) Do supply voltage measurement on corresponding camera supply voltages (see solution above). You can check this voltages while trying to enable the camera in ON condition.
    There are three voltage converters circuit that feeds voltage to enable the camera. This voltage  ranges are as follows, 1.8volts, 2.8volts and 1.3volts  DC voltages.
     This voltages are converted by a DC to DC converters chip. The chips converts the Battery voltage which is 3.7 volts and drop it down or minimize it to 1.8, 2.8 and 1.3 DC voltage.
  So, ensure that the battery supply voltage is properly feeds to each of the DC converter chips.
If  the battery supply voltage is present and still there is no voltage output you can read on each chip, you may then check or replace the DC to DC converter IC's.

d) If all voltages reading is working good and no problems found, but the problem still exists, you may then proceed to rework or replace the Camera Accelerator IC this chip holds and control the camera data signals before it feeds to the application processor IC.


Articles Nokia X6 Camera Failure Problem Solution - hardware repair solution finished we discussed

A few of our information about the Nokia X6 Camera Failure Problem Solution - hardware repair solution, I hope you can exploit carefully

No've You've finished reading an article on Nokia X6 Camera Failure Problem Solution - hardware repair solution and many articles about modern home in our blog this, please read it. and url link of this article is https://liveeconcerts.blogspot.com/2014/03/nokia-x6-camera-failure-problem.html Hopefully discussion articles on provide more knowledge about the world of tech gadgets.

Tag : ,

Related Posts :

0 Response to "Nokia X6 Camera Failure Problem Solution - hardware repair solution"

Post a Comment