This is about : MTK Android that wont come on after interrupting SP Flash tool
And this article : MTK Android that wont come on after interrupting SP Flash tool
Article Android Modding, Article Phone Flashing,
MTK Android that wont come on after interrupting SP Flash tool
Here is the solution for MTK mediatek devices like Tecno, Gionee, Micromax, Infinix, Opsson, etc that refused to be dictate after interrupting the flashing process.
Sometimes you might come up by interrupting the process unknowingly. SP flash tool shouldn't be interrupt when flash is going on or read back process. mistakenly do, the phone will go off and will not come on at all. You might get the "USB device not recognized" error on further flashing attempts. If somehow, the process got interrupted and the phone ain't coming up again, don't panic. All you need to do is connect the phone to a laptop (via a USB cord) or power source and leave it to charge for some time. It could take up to two hours but once the phone is revived, your battery could read as low as 1% . just leave it to keep charging before powering it up.
Solution to fix the issue:
>> Start pressing the Volume up + Power button while charging
>> You could remove and boost the battery using a desktop / external charger then resume internal charging.
>>Uninstall then re-install MTK preloader vcom drivers
Sometimes you might come up by interrupting the process unknowingly. SP flash tool shouldn't be interrupt when flash is going on or read back process. mistakenly do, the phone will go off and will not come on at all. You might get the "USB device not recognized" error on further flashing attempts. If somehow, the process got interrupted and the phone ain't coming up again, don't panic. All you need to do is connect the phone to a laptop (via a USB cord) or power source and leave it to charge for some time. It could take up to two hours but once the phone is revived, your battery could read as low as 1% . just leave it to keep charging before powering it up.
Solution to fix the issue:
>>Pull the battery off > Connect the phone to a charger without battery inside > put the battery back while the phone is still connected to the charger
>> Start pressing the Volume up + Power button while charging
>> You could remove and boost the battery using a desktop / external charger then resume internal charging.
>>Uninstall then re-install MTK preloader vcom drivers
Articles MTK Android that wont come on after interrupting SP Flash tool finished we discussed
A few of our information about the MTK Android that wont come on after interrupting SP Flash tool, I hope you can exploit carefully
No've You've finished reading an article on MTK Android that wont come on after interrupting SP Flash tool and many articles about modern home in our blog this, please read it. and url link of this article is http://liveeconcerts.blogspot.com/2015/10/mtk-android-that-wont-come-on-after.html Hopefully discussion articles on provide more knowledge about the world of tech gadgets.
Tag : Android Modding, Phone Flashing,
0 Response to "MTK Android that wont come on after interrupting SP Flash tool"
Post a Comment